欢迎访问湖南驰明新材料科技有限公司官方网站!


全国服务热线:
t.png4008-299-611


调光膜
您当前的位置 : 首 页 > 产品中心 > 可控变色膜

液晶智能电控膜

产品属性

  • 所属分类:可控变色膜
  • 浏览次数:0
  • 发布日期:2019-08-28
  • 产品概述

  PDLC膜简而言之是一个巨型平板电容,依靠施加或撤除电场来使极性液晶分子定向或无序排列,从而达到透明或遮蔽效果。其效果如下图所示:升高电压 降低电压 磨砂态 Higher voltage Lower voltage 透明态(0电压) Grind arenaceous state (0 voltage) Transparent state (rated maximum voltage)(额定电压) ITO导电膜 ITO conductive film 液晶 liquid crystal PET膜Polymor 高分子材料 PET Film通电状态ON 断电状态OFF 液晶 liquid crystal ITO导电膜 ITO conductive film PET膜 PET Film Polymor 高分子材料 

  In short, as the above figshows,PDLC film is a huge flat capacitor which realizes transparent or opaque effect by applying or removing electric field to drive the liquid crystal molecules aligned or disordered array.Following fig shows PDLC film’s usage.

调光膜

产品参数/Product Specification:

变色膜


颜色:乳白色,浅蓝黑

厚度:约0.11mm

安装方式:采用我司特制安装液结合传统贴膜方法进行安装

电源:12/24DC至36 AC

通电-断电:<200ms

断电-通电:<10ms

功率:约5 2 2

.66W/m (配置最多10W/m )

开关次数:>180万次(循环时间1.5S)

标准工温:-35℃~75℃

保存温度:-45℃~120℃(2h)/75℃(十年)

耐高温高湿:100℃水煮2h

发热:工作状态不会产生热量

仅0.11mm 薄 >82%透光 透 耐 -45℃~120℃ 防 防水防腐蚀 防UI>99.8%

Colour creamy white,pale blue and black

Thickness: about 0.11mm

Installation method: adopt our company’s special installation liquid combined

with the traditional film methodfor installation

Power supply: 12/24DC to 36 AC

Power on-off: <200ms

Power off-on: <10ms

Power: 5.66W/m (configuration maximum 10W/m )

Switching time: > 1.8 million times(cycle time 1.5 S)

Standard working temperature: - 35℃~75

Twmperature: - 45℃~120℃(2H)/(10years)

Resistance to high temperature and high humidity :

100℃bolied 2H

Heat: on heat is produced while working


产品对比/Product comparisoncomparison

液晶智能电控膜


产品优势/Product Advantage comparison

我司产品的优势在于厚度,耐温及均匀性。

一、厚度 我司产品厚度仅为0.11mm,能在270℃下发生形变,液晶可承受瞬间温度为300℃,所以厚度>0.11mm时不能双面弯曲。

二、耐温 我司产品是全球能耐-45℃,60天在此情况下不结晶的配方体系。

三、均匀性 我司产品是采用“光致缩变体系”(自命名)而生产的超薄膜更均匀,无气泡,空洞,色差,斑块等缺陷因汽车天窗均带有弧度,结合我司产品的优势可完美应用于汽车天窗玻璃之中,从而应对汽车的不同使用环境。

The advantages of our products lie in thickness, temperature resistance and uniformity. 1:The thickness of the our product thickness is only 0.11mm, car occur deformation under 270 ℃ ,li quid crystal can withstand instantaneous temperature is 300℃ , so can`t double bend thickness>0.11mm. 2:heat resistance our products is the only global ability to 45℃,60 days in this case no crystallization and formulation of the system 3:uniformity our products are the only "photorefractuve systen" (self-naming) used in production of more uniform ultrathin films,no bubble, void,color difference,plaque and other defects Because the car skylights are all curved,the advantages of company`s products can be perfectly applied to the car skylights glass,so as to cope with the different use environment of the car.


作用/Effect

液晶智能电控膜

1 、及时与安全隐私控制配合完整的建筑架构 

Instant and precise privacy control and security with architectural interity 

2 、环保、保护皮肤免受99%的紫外线

Eco-friendly,protect skin of damaging UV 99%

3 、特殊光学质量降低了强光和防止眼疲劳

Exceptional optical quality that reduce

glare & eye strain

4、 防后车远光灯,为行车安全增加一份保障

Reduced fading of carpets,furniture and protects valuable artwork

5、 周围的环境质量控制

Ambient temperature control

6 、造型美观

Aesthetically pleasing

7、 高耐用性

High durability 

8、 环保降低维护费用

Ultra hygienic low maintenance cost



汽车玻璃调光膜

汽车玻璃调光膜



标签

上一篇:变色膜2019-09-02
下一篇:可控变色膜2019-08-27

最近浏览:

相关产品

4008-299-611

快速导航

> 网站首页         > 关于我们         > 新闻资讯

> 应用场景         > 在线留言         > 联系我们


联系我们

m1.png4008-299-611    
m3.png

湖南省城陵矶临港新区保税区工业园


二维码

调光膜